The flexible LED lamp belt adopts FPC as the assembly circuit board, and uses the patch LED for assembly, so that the thickness of the product is only the thickness of a coin, which does not occupy space. General specifications are 30cm long 18 LED, 24 LED and 50cm long 15 LED, 24 LED, 30 LED, etc.. There are 60cm, 80cm and so on, different users have different specifications.
And can be cut at will, can also be extended arbitrarily and the light is not affected. The soft material of FPC can be bent, folded and wound at will, and can be moved and expanded in 3D space without breaking.
Suitable for use in irregular places and narrow spaces, but also because of its can be arbitrary bending and winding, suitable for any combination of various patterns in advertising decoration.
LED hard light strip is made of PCB hard board assembly circuit board, LED useful patch LED assembly, also useful straight insert LED assembly, depending on the need for different and different components.
The advantages of hard lamp strip are relatively easy to fix, processing and installation are more convenient; the disadvantage is that it cannot be bent at will and is not suitable for irregular places.
There are 18 LED, 24 LED, 30 LED, 36 LED, 40 LED and other specifications for hard light strip; there are 18 beds, 24 leds, 36 leds, 48 beds and other specifications. There are front and side, side light is also called the Great Wall lamp.
led neon light manufacturer Installation instructions
1. When installing, please frame the plastic shaft and then install it from the building. Do not remove the whole roll and install it again.
2. The incision is cut evenly with a blade, and cannot be cut off at will; cut off the excess copper wire, then swing the tip side to side, and put it in the pin.
3. Plug and tail plug with silica gel, waterproof treatment.
4. Do not pull the LED flexible neon lamp too hard during installation. This product can only withstand 4.5KG tension.