5 thoughts on “How to clean the gold very brightly?”
Roman
The cleaning steps are as follows: 1, half a spoonful of salt in the bowl. 2, a spoonful of baking soda. 3, a little detergent. 4, then pour enough water and stir evenly. 5. Put the gold jewelry into soak for an hour. 6, take it out with a fine brush or toothbrush, and then put it in the water. As long as it is pure gold jewelry, it will become like a new one. Extension information: The maintenance of gold jewelry The gold jewelry is not very delicate, but if you do not care carefully, it will also lose its initial gloss and charm. Generally speaking, the following points are to be careful: 1, the chemicals of cleaning essence will change the color of the gold, so you should take off the gold jewelry before doing cleaning. 2. Avoid contact with high volatile substances such as perfume and glue directly, otherwise it will easily cause gold decoration to fade. 3. When swimming, remove the gold ornaments to avoid chemical changes in the surface layer after encountering seawater or pool water. 4, use a velvet cloth to wrap it in the jewelry box during storage to avoid rubbing and damage to each other. 5, gold is soft and easy to deform, so do not pull the necklace and other accessories to avoid deformation. 6. Pure gold jewelry will have a chemical reaction when it encounters water and silver, and white spots appear. When cleaning, you can restore the original color as long as you grill under the alcohol lamp for a while. 7. The gold jewelry after wearing is often lost due to the stains and dust stains. At this time, as long as the gold decoration is placed in the neutral detergent soaked and washed with warm water, and then removed and wiped. Reference information Source: Baidu Encyclopedia-Golden Jewelry
The cleaning method that makes gold brighten is: 1, ammonia water cleaning ammonia water has a very effective effect on the cleaning of the gold surface, drip a few drops of ammonia water in a pure water bottle, put the gold jewelry in gold jewelry After entering the bottle, you can remove the gold jewelry with a soft cloth and wipe it with a soft cloth. Use this method to clean the gold jewelry to make the gold brighter. 2, ice acetic acid washing In 1000 ml of warm boiling water and 200 ml of ice acetic acid to make a water solution, soak the gold jewelry into the water solution made for 10 minutes, dip the soft brush with hot brush and gently gently dip the hot water gently. Brush the ground, and finally rinse it with water. It is best to dip the soapy water with a skim cotton ball and scrub without water alcohol, so that the gold jewelry cleaned will become extremely gorgeous. 3, soapy water washing This was washed with soapy water mixed with a little alcohol. Or use a pill dipped in a toothpaste gently until the light. You can also buy a pack of shadow powder into 100 grams of water in the photo equipment store, stir it into a solution, immerse the gold in the solution, take it out for about 5 minutes, then rinse with water, and then gently wipe it with a clean soft cloth. It can be eliminated. 4, salt cleaning If the surface of the gold jewelry has a black silver film, the more commonly used method is: 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, prepared into a gold device cleaning Put the golden jewelry in a bowl and pour it into the cleaning agent. After two hours, remove the golden jewelry, rinse it with water, and then wipe it with a soft cloth. 5, salt and vinegar mixed synthetic cleaning agents, and use it to wipe the pure gold jewelry, which can make a long time. Wipe with a toothpaste or scrub it with the hot rice soup, you can also restore the gloss of gold jewelry.
You can clean it like this 1. If the gold jewelry is only a little dirt, then squeeze with a toothpaste to wash with a toothbrush, and then dry it with a soft cotton cloth. 2. If there is already a black silver film on the surface of the gold, you can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, and 60 ml of water. Pour in the cleaning agent. After 2 hours, remove the gold, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth. 3, the gold inlaid gold can be rolled with a cotton with a match stick, wet the gem and frame in the mixed fluid of the dew and glycerin, and then use the pill to brighten the ring. Essence Actually, no matter how golden jewelry is cleaned brighter, the most important thing is that we pay attention to maintenance during usual wearing. If you want golden light and more lasting, you can apply a thin nail polish to the gold. It will be brighter and play a role in protecting the film.
1. Protect the gloss of the gold jewelry, you can apply a layer of nail polish thinly on it; 2, if there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, 60 ml of water , Match into a "Gold Washing Order", put the gold jewelry in a bowl, pour it into the cleaning agent. After 2 hours, remove the golden jewelry, use water (preferably not hard water) to rinse, buried in the wood chips to dry in the wood chips dry , Then wipe it with a soft cloth; 3, roll a piece of cotton with a popsicle or match stick, wet in the mixed fluid of the flower dew and glycerin, and then wipe the rings with the velvet cloth when scrubbing the gem. Do not scrape it with a kind of sharp objects; 4, salt and vinegar mixed with synthetic cleaner, and use it to wipe the pure gold jewelry, which can make a long time.
You can try a small ultrasonic cleaning machine. Ultrasonic cleaning can efficiently handle the dust and dirt on the surface of the objects. The cleaning of jewelry will become more beautiful. Many large -scale jewelry maintenance stores also use this way of cleaning.
The cleaning steps are as follows:
1, half a spoonful of salt in the bowl.
2, a spoonful of baking soda.
3, a little detergent.
4, then pour enough water and stir evenly.
5. Put the gold jewelry into soak for an hour.
6, take it out with a fine brush or toothbrush, and then put it in the water. As long as it is pure gold jewelry, it will become like a new one.
Extension information:
The maintenance of gold jewelry
The gold jewelry is not very delicate, but if you do not care carefully, it will also lose its initial gloss and charm. Generally speaking, the following points are to be careful:
1, the chemicals of cleaning essence will change the color of the gold, so you should take off the gold jewelry before doing cleaning.
2. Avoid contact with high volatile substances such as perfume and glue directly, otherwise it will easily cause gold decoration to fade.
3. When swimming, remove the gold ornaments to avoid chemical changes in the surface layer after encountering seawater or pool water.
4, use a velvet cloth to wrap it in the jewelry box during storage to avoid rubbing and damage to each other.
5, gold is soft and easy to deform, so do not pull the necklace and other accessories to avoid deformation.
6. Pure gold jewelry will have a chemical reaction when it encounters water and silver, and white spots appear. When cleaning, you can restore the original color as long as you grill under the alcohol lamp for a while.
7. The gold jewelry after wearing is often lost due to the stains and dust stains. At this time, as long as the gold decoration is placed in the neutral detergent soaked and washed with warm water, and then removed and wiped.
Reference information Source: Baidu Encyclopedia-Golden Jewelry
The cleaning method that makes gold brighten is:
1, ammonia water cleaning
ammonia water has a very effective effect on the cleaning of the gold surface, drip a few drops of ammonia water in a pure water bottle, put the gold jewelry in gold jewelry After entering the bottle, you can remove the gold jewelry with a soft cloth and wipe it with a soft cloth. Use this method to clean the gold jewelry to make the gold brighter.
2, ice acetic acid washing
In 1000 ml of warm boiling water and 200 ml of ice acetic acid to make a water solution, soak the gold jewelry into the water solution made for 10 minutes, dip the soft brush with hot brush and gently gently dip the hot water gently. Brush the ground, and finally rinse it with water. It is best to dip the soapy water with a skim cotton ball and scrub without water alcohol, so that the gold jewelry cleaned will become extremely gorgeous.
3, soapy water washing
This was washed with soapy water mixed with a little alcohol. Or use a pill dipped in a toothpaste gently until the light. You can also buy a pack of shadow powder into 100 grams of water in the photo equipment store, stir it into a solution, immerse the gold in the solution, take it out for about 5 minutes, then rinse with water, and then gently wipe it with a clean soft cloth. It can be eliminated.
4, salt cleaning
If the surface of the gold jewelry has a black silver film, the more commonly used method is: 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, prepared into a gold device cleaning Put the golden jewelry in a bowl and pour it into the cleaning agent. After two hours, remove the golden jewelry, rinse it with water, and then wipe it with a soft cloth.
5, salt and vinegar mixed synthetic cleaning agents, and use it to wipe the pure gold jewelry, which can make a long time. Wipe with a toothpaste or scrub it with the hot rice soup, you can also restore the gloss of gold jewelry.
You can clean it like this
1. If the gold jewelry is only a little dirt, then squeeze with a toothpaste to wash with a toothbrush, and then dry it with a soft cotton cloth.
2. If there is already a black silver film on the surface of the gold, you can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, and 60 ml of water. Pour in the cleaning agent. After 2 hours, remove the gold, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3, the gold inlaid gold can be rolled with a cotton with a match stick, wet the gem and frame in the mixed fluid of the dew and glycerin, and then use the pill to brighten the ring. Essence
Actually, no matter how golden jewelry is cleaned brighter, the most important thing is that we pay attention to maintenance during usual wearing. If you want golden light and more lasting, you can apply a thin nail polish to the gold. It will be brighter and play a role in protecting the film.
1. Protect the gloss of the gold jewelry, you can apply a layer of nail polish thinly on it;
2, if there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, 60 ml of water , Match into a "Gold Washing Order", put the gold jewelry in a bowl, pour it into the cleaning agent. After 2 hours, remove the golden jewelry, use water (preferably not hard water) to rinse, buried in the wood chips to dry in the wood chips dry , Then wipe it with a soft cloth;
3, roll a piece of cotton with a popsicle or match stick, wet in the mixed fluid of the flower dew and glycerin, and then wipe the rings with the velvet cloth when scrubbing the gem. Do not scrape it with a kind of sharp objects;
4, salt and vinegar mixed with synthetic cleaner, and use it to wipe the pure gold jewelry, which can make a long time.
You can try a small ultrasonic cleaning machine. Ultrasonic cleaning can efficiently handle the dust and dirt on the surface of the objects. The cleaning of jewelry will become more beautiful. Many large -scale jewelry maintenance stores also use this way of cleaning.