When the gold and silverrs are making gold jewelry, the gold that the customer is handed over to him first is how many grams of the balance, and then put it on a thick hard wood board. There is a burning pit on the wooden board that places gold in a concave pit and then uses oxygen -blowing muskets to burn gold. After burning and melting, pour gold into the selected jewelry model (plaster), and then press the mold with yellow mud. After pressing, wait for a while, immediately knock out the yellow mud and gypsum and remove the forming gold jewelry, put it in the nitrate solution to clean it, and finally polish it with a polishing machine. Go up and weigh the customers again. How many gold is the original gold, and it is still many after making gold jewelry. It can be said that there will be no less in a milligram. Customers who came to make jewelry have been watching their eyes wide open, and they did not find that the gold was stolen or replaced at all, and then paid the processing fee, and walked away with the well -made jewelry. In fact, gold has been stolen during the process of making, at least 10 % of them. In other words, 10 grams of gold has been stolen at least 1 gram, and the stolen gold has been replaced by other metals. But the customer can't find the process of being stolen. Even if there are a few pairs of eyes staring, even shooting with cameras and cameras, gold and silver artists still steal the gold of customers, but customers can't find it. What kind of mystery is he?
The mystery lies in the hard wood board used to install gold. The main secret is the concave pit that was burned on the wooden board, and the article was started from there. It turned out that a hole was already cone on the side of the pit at the bottom of the pit. The jewelry gold and silverrs have calculated the volume of the hole (accommodation), and then covered the holes of the hole with fire charcoal ash; on the other side of the bottom of the pit, to the top of the top, use an awl cone with a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a cave hole, a hole, a hole, a hole, a hole, a hole, a hole. Putting the fake gold made by the jewelry gold and silverrs themselves, the weight of the empty hole on the lower side is the weight that can accommodate the gold. Generally, the two holes are equal. Then, it also covered the hole with fire charcoal ash.
Is when someone is to make jewelry, the gold and silverrs will give the customer the gold that they give it to the prepared wooden board. When the gold is burned to melting, the musket mouth is used to blew the ground with empty holes with a pits at the bottom of the concave pits, and blow away the fiery carbon ash blocked by the empty hole mouth, and the gold flows into the empty hole. Then, when the spray gun head was slanted, when the jewelry was dipped in some borax with a small wooden stick to help the flames, and gently scraped it with a small wooden stick, covering the cavity of the golden -filled gold ash. At this time, the gold in the concave pit had already been burned into a bead -shaped, and the gold and silver artists rolled the golden beads gently. Drive the golden beads towards the entrance of the cave with fake gold, and blow the charcoal ash that blocked the cave with a spray gun mouth to burn the flame at the position of the holiday gold. The melting point of fake gold is lower than the gold melting point, and only a few hundred hundreds of high temperature (the golden melting point is 1064.342 c. At 20 o'clock), the fake gold will soon flow out to mix with the real gold. The gold and silver artists kept rolling the golden beads and kept burning with flames. In this way, the whole process of stealing gold is completed. Because the flame sprayed from the fire was particularly bright and the oxygen was blown, the light emitted was particularly dazzling, and the eyes could not be seen clearly. So how many eyes stared at the gold and were stolen. The author has done a test. I took the camera to shoot the wooden boards during the standard and did not find the doubts. It was to slow down the lens observation and could not see the flaws.
Pecent the golden process is completed, and the goldrs pour the tight beads into the plaster model. After the end, I lost the wooden section next to it. At this time, people's attention has gathered on the plaster model, and no one will pay attention to the wooden board anymore. Until the entire process of making gold jewelry was completed, gold and silver artists took the gold jewelry to the balance and called it to customers. When the customer saw that the gold was not small at all, he paid the processing fee and took the gold jewelry to leave with peace of mind. Therefore, people are often stolen in the drums.
. Generally, the golden artisan has several wooden boards, and some wooden boards have burned pit on both sides. Each template represents different weights. Design a piece of wooden board specially steal 1 gram of gold. A piece of stolen 2 grams, a piece of stealing 3 grams, etc., wait, and have a mark. For example, if the customer takes 30 grams of gold to make jewelry, the gold and silverrs will take out the wooden board stealing 3 grams to use it. If the customer takes 20 grams of gold to make jewelry, the gold and silverrs will take out the wooden boards that stole 2 grams to use it. If the customer takes 10 grams of gold to make the jewelry, the gold and silverrs will use 1 gram of wooden boards to use it. Goldrs generally steal customer gold around 1 to 30 %. How much gold is stolen is directly related to the quality of the business. Sometimes a few customers come to make jewelry a day, and gold and silverrs can steal more than ten grams to tens of grams of gold. Coupled with the processing fee, the daily income is quite considerable.
Pay content for time limit to check for freenAnswer Hello, first mix your jewelry with yellow water, that is, sulfuric acid and sulfuric acid. Tolerant part of your jewelry. Then sink copper. Du Jin's way to help you come back. Also called electricity. Makes you heavy.nFire consumption ... repair process. Cleaning and polishing processnOne of the scabies: Gold on the scale. At present, most of the golden weighing tools in jewelry processing stores are tray balances. Some illegal gold handy processing processes are ghosts on this tray balance. Light, a tray is heavy. When they meet someone to process the jewelry with gold, they put the gold in the light pallet. After processing, the jewelry will be placed in the heavy tray. I don't know the ghost. Two of fraud: "Wang Shui" stripping gold "Wang Shui" is a chemical liquid with concentrated nitric acid and concentrated hydrochloric acid. Chemical reactions occur, but "Wang Shui" can easily dissolve gold, so some illegal jewelry processors can use this simple chemical reaction to clean the gold jewelry for customers, so that customers can not see it with the naked eye. , Was peeled off the gold. Those who claim to clean the gold jewelry for customers are often hidden in this kind of "cat greasy". Three of Deception: The illegal jewelry processors of stealing gold and money are to melt gold for customers and processed jewelry. In the process of melting gold for customers, they mixed some silver powder and copper powder in removing medicine powder and melted with gold. The customer surface saw that the processor removed the debris in gold. In essence, they, they, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they are essentially. In essence, they are essentially. It is based on the name of miscellaneous objects and adulteration in the melting gold. The purpose is to make it difficult for customers to notice the amount of portion after deducting customer gold. The fourth fraud: When the muddy water is touched, some of the plaster molds are left in their plaster molds, leaving a small part of gold left, and throwing away the waste plaster mold in front of the customer, resulting in a gypsum mold. The illusion of gold, after the customer left, they took the discarded waste model and took out the gold. There are also a small part of the illegal jewelry processors who cut off some of the "corner materials" on the customer's hand decoration when the customer is not paying attention. "".n1 morenBleak
The first is to say that there is a problem, and then on the mold, there must be be careful of the process of knocking. Anyway, don’t steal your gold without food
00:00 / 03: 0070% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
When the gold and silverrs are making gold jewelry, the gold that the customer is handed over to him first is how many grams of the balance, and then put it on a thick hard wood board. There is a burning pit on the wooden board that places gold in a concave pit and then uses oxygen -blowing muskets to burn gold. After burning and melting, pour gold into the selected jewelry model (plaster), and then press the mold with yellow mud. After pressing, wait for a while, immediately knock out the yellow mud and gypsum and remove the forming gold jewelry, put it in the nitrate solution to clean it, and finally polish it with a polishing machine. Go up and weigh the customers again. How many gold is the original gold, and it is still many after making gold jewelry. It can be said that there will be no less in a milligram. Customers who came to make jewelry have been watching their eyes wide open, and they did not find that the gold was stolen or replaced at all, and then paid the processing fee, and walked away with the well -made jewelry.
In fact, gold has been stolen during the process of making, at least 10 % of them. In other words, 10 grams of gold has been stolen at least 1 gram, and the stolen gold has been replaced by other metals. But the customer can't find the process of being stolen. Even if there are a few pairs of eyes staring, even shooting with cameras and cameras, gold and silver artists still steal the gold of customers, but customers can't find it. What kind of mystery is he?
The mystery lies in the hard wood board used to install gold. The main secret is the concave pit that was burned on the wooden board, and the article was started from there. It turned out that a hole was already cone on the side of the pit at the bottom of the pit. The jewelry gold and silverrs have calculated the volume of the hole (accommodation), and then covered the holes of the hole with fire charcoal ash; on the other side of the bottom of the pit, to the top of the top, use an awl cone with a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a hole hole, a cave hole, a hole, a hole, a hole, a hole, a hole, a hole. Putting the fake gold made by the jewelry gold and silverrs themselves, the weight of the empty hole on the lower side is the weight that can accommodate the gold. Generally, the two holes are equal. Then, it also covered the hole with fire charcoal ash.
Is when someone is to make jewelry, the gold and silverrs will give the customer the gold that they give it to the prepared wooden board. When the gold is burned to melting, the musket mouth is used to blew the ground with empty holes with a pits at the bottom of the concave pits, and blow away the fiery carbon ash blocked by the empty hole mouth, and the gold flows into the empty hole. Then, when the spray gun head was slanted, when the jewelry was dipped in some borax with a small wooden stick to help the flames, and gently scraped it with a small wooden stick, covering the cavity of the golden -filled gold ash. At this time, the gold in the concave pit had already been burned into a bead -shaped, and the gold and silver artists rolled the golden beads gently. Drive the golden beads towards the entrance of the cave with fake gold, and blow the charcoal ash that blocked the cave with a spray gun mouth to burn the flame at the position of the holiday gold. The melting point of fake gold is lower than the gold melting point, and only a few hundred hundreds of high temperature (the golden melting point is 1064.342 c. At 20 o'clock), the fake gold will soon flow out to mix with the real gold. The gold and silver artists kept rolling the golden beads and kept burning with flames. In this way, the whole process of stealing gold is completed. Because the flame sprayed from the fire was particularly bright and the oxygen was blown, the light emitted was particularly dazzling, and the eyes could not be seen clearly. So how many eyes stared at the gold and were stolen. The author has done a test. I took the camera to shoot the wooden boards during the standard and did not find the doubts. It was to slow down the lens observation and could not see the flaws.
Pecent the golden process is completed, and the goldrs pour the tight beads into the plaster model. After the end, I lost the wooden section next to it. At this time, people's attention has gathered on the plaster model, and no one will pay attention to the wooden board anymore. Until the entire process of making gold jewelry was completed, gold and silver artists took the gold jewelry to the balance and called it to customers. When the customer saw that the gold was not small at all, he paid the processing fee and took the gold jewelry to leave with peace of mind. Therefore, people are often stolen in the drums.
. Generally, the golden artisan has several wooden boards, and some wooden boards have burned pit on both sides. Each template represents different weights. Design a piece of wooden board specially steal 1 gram of gold. A piece of stolen 2 grams, a piece of stealing 3 grams, etc., wait, and have a mark. For example, if the customer takes 30 grams of gold to make jewelry, the gold and silverrs will take out the wooden board stealing 3 grams to use it. If the customer takes 20 grams of gold to make jewelry, the gold and silverrs will take out the wooden boards that stole 2 grams to use it. If the customer takes 10 grams of gold to make the jewelry, the gold and silverrs will use 1 gram of wooden boards to use it. Goldrs generally steal customer gold around 1 to 30 %. How much gold is stolen is directly related to the quality of the business. Sometimes a few customers come to make jewelry a day, and gold and silverrs can steal more than ten grams to tens of grams of gold. Coupled with the processing fee, the daily income is quite considerable.
Pay content for time limit to check for freenAnswer Hello, first mix your jewelry with yellow water, that is, sulfuric acid and sulfuric acid. Tolerant part of your jewelry. Then sink copper. Du Jin's way to help you come back. Also called electricity. Makes you heavy.nFire consumption ... repair process. Cleaning and polishing processnOne of the scabies: Gold on the scale. At present, most of the golden weighing tools in jewelry processing stores are tray balances. Some illegal gold handy processing processes are ghosts on this tray balance. Light, a tray is heavy. When they meet someone to process the jewelry with gold, they put the gold in the light pallet. After processing, the jewelry will be placed in the heavy tray. I don't know the ghost. Two of fraud: "Wang Shui" stripping gold "Wang Shui" is a chemical liquid with concentrated nitric acid and concentrated hydrochloric acid. Chemical reactions occur, but "Wang Shui" can easily dissolve gold, so some illegal jewelry processors can use this simple chemical reaction to clean the gold jewelry for customers, so that customers can not see it with the naked eye. , Was peeled off the gold. Those who claim to clean the gold jewelry for customers are often hidden in this kind of "cat greasy". Three of Deception: The illegal jewelry processors of stealing gold and money are to melt gold for customers and processed jewelry. In the process of melting gold for customers, they mixed some silver powder and copper powder in removing medicine powder and melted with gold. The customer surface saw that the processor removed the debris in gold. In essence, they, they, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they, in essence, they are essentially. In essence, they are essentially. It is based on the name of miscellaneous objects and adulteration in the melting gold. The purpose is to make it difficult for customers to notice the amount of portion after deducting customer gold. The fourth fraud: When the muddy water is touched, some of the plaster molds are left in their plaster molds, leaving a small part of gold left, and throwing away the waste plaster mold in front of the customer, resulting in a gypsum mold. The illusion of gold, after the customer left, they took the discarded waste model and took out the gold. There are also a small part of the illegal jewelry processors who cut off some of the "corner materials" on the customer's hand decoration when the customer is not paying attention. "".n1 morenBleak
The first is to say that there is a problem, and then on the mold, there must be be careful of the process of knocking. Anyway, don’t steal your gold without food
Fire consumption ... repair process. Cleaning and polishing process.
00:00 / 03: 0070% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description